dmesg - 2012-05-23 09:49
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-41-server (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #89-Ubuntu SMP Fri Apr 27 22:33:31 UTC 2012 (Ubuntu 2.6.32-41.89-server 2.6.32.59+drm33.24)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffb000 (usable)
BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
DMI 2.4 present.
last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
last_pfn = 0xdfffb max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000dfffb000 (usable)
modified: 00000000dfffb000 - 00000000e0000000 (reserved)
modified: 00000000fffbc000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000220000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfffb000
NX (Execute Disable) protection: active
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffb000 page 4k
kernel direct mapping tables up to dfffb000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000220000000
NX (Execute Disable) protection: active
0100000000 - 0220000000 page 2M
kernel direct mapping tables up to 220000000 @ c000-16000
RAMDISK: 37c1c000 - 37fef751
ACPI: RSDP 00000000000f8900 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffdd70 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dffffdf0 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffdf50 01E22 (v01 BXPC BXDSDT 00000001 INTL 20090123)
ACPI: FACS 00000000dffffd80 00040
ACPI: SSDT 00000000dfffdef0 0005E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffddf0 0008A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000dfffddb0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000220000000
Bootmem setup node 0 0000000000000000-0000000220000000
NODE_DATA [0000000000011000 - 0000000000016fff]
bootmap [0000000000017000 - 000000000005afff] pages 44
(8 early reservations) ==> bootmem [0000000000 - 0220000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001a89544] TEXT DATA BSS ==> [0001000000 - 0001a89544]
#3 [0037c1c000 - 0037fef751] RAMDISK ==> [0037c1c000 - 0037fef751]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0001a8a000 - 0001a8a071] BRK ==> [0001a8a000 - 0001a8a071]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000]
found SMP MP-table at [ffff8800000f8950] f8950
kvm-clock: cpu 0, msr 0:188bd81, boot clock
[ffffea0000000000-ffffea00077fffff] PMD -> [ffff880001c00000-ffff880008dfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00220000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000000 -> 0x00000001
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x000dfffb
0: 0x00100000 -> 0x00220000
On node 0 totalpages: 2097045
DMA zone: 56 pages used for memmap
DMA zone: 109 pages reserved
DMA zone: 3829 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899123 pages, LIFO batch:31
Normal zone: 16128 pages used for memmap
Normal zone: 1163520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000fffbc000
PM: Registered nosave memory: 00000000fffbc000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1ffbc000)
Booting paravirtualized kernel on KVM
NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff880009000000 s92120 r8192 d22568 u524288
pcpu-alloc: s92120 r8192 d22568 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
kvm-clock: cpu 0, msr 0:9015d81, primary cpu clock
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066472
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000919e000 - ffff88000d19e000
software IO TLB at phys 0x919e000 - 0xd19e000
Memory: 8189852k/8912896k available (5536k kernel code, 524716k absent, 198328k reserved, 3121k data, 808k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 2394.222 MHz processor.
Calibrating delay loop (skipped) preset value.. 4788.44 BogoMIPS (lpj=23942220)
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0x0 -> Node 0
mce: CPU supports 10 MCE banks
Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22886 entries in 90 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/0x1 -> Node 0
CPU1: Intel QEMU Virtual CPU version 0.12.3 stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
kvm-clock: cpu 1, msr 0:9095d81, secondary cpu clock
Booting processor 2 APIC 0x2 ip 0x6000
Initializing CPU#2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 2/0x2 -> Node 0
CPU2: Intel QEMU Virtual CPU version 0.12.3 stepping 03
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
kvm-clock: cpu 2, msr 0:9115d81, secondary cpu clock
Booting processor 3 APIC 0x3 ip 0x6000
Initializing CPU#3
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 3/0x3 -> Node 0
CPU3: Intel QEMU Virtual CPU version 0.12.3 stepping 03
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
kvm-clock: cpu 3, msr 0:9195d81, secondary cpu clock
Brought up 4 CPUs
Total of 4 processors activated (19153.77 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 0 1 2 3
CPU1 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 1 2 3 0
CPU2 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 2 3 0 1
CPU3 attaching sched-domain:
domain 0: span 0-3 level CPU
groups: 3 0 1 2
devtmpfs: initialized
regulator: core version 0.5
Time: 19:22:06 Date: 05/21/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: your CPUs had inconsistent MTRRdefType settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
Trying to unpack rootfs image as initramfs...
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
pci 0000:00:01.2: reg 20 io port: [0xc020-0xc03f]
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe1ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xe2000000-0xe2000fff]
pci 0000:00:02.0: reg 30 32bit mmio pref: [0xe2010000-0xe201ffff]
pci 0000:00:03.0: reg 10 io port: [0xc040-0xc05f]
pci 0000:00:03.0: reg 14 32bit mmio: [0xe2020000-0xe2020fff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1337628126.290:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 15995
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 12:410:395
rtc_cmos 00:01: setting system clock to 2012-05-21 19:22:06 UTC (1337628126)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing initrd memory: 3917k freed
ata2.01: NODEV after polling detection
ata2.00: ATAPI: QEMU DVD-ROM, 0.12.3, max UDMA/100
ata1.00: ATA-7: QEMU HARDDISK, 0.12.3, max UDMA/100
ata1.00: 24578048 sectors, multi 16: LBA48
ata1.01: ATA-7: QEMU HARDDISK, 0.12.3, max UDMA/100
ata1.01: 40962048 sectors, multi 16: LBA48
ata2.00: configured for MWDMA2
ata1.00: configured for MWDMA2
ata1.01: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.12 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 24578048 512-byte logical blocks: (12.5 GB/11.7 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 0.12 PQ: 0 ANSI: 5
sda:
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.12 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 40962048 512-byte logical blocks: (20.9 GB/19.5 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda1 sda2
sdb: sdb1
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg2 type 5
Freeing unused kernel memory: 808k freed
Write protecting the kernel read-only data: 7836k
udev: starting version 151
FDC 0 is a S82078B
EXT4-fs (sda1): mounted filesystem with ordered data mode
udev: starting version 151
Adding 3905528k swap on /dev/sda2. Priority:-1 extents:1 across:3905528k
EXT4-fs (sdb1): mounted filesystem with ordered data mode
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb0: VGA16 VGA frame buffer device
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Console: switching to colour frame buffer device 80x30
eth0: no IPv6 routers present